gap fill in prefinished hardwood flooring
Mark Romeo
19 days ago
Featured Answer
Sort by:Oldest
Comments (9)
Minardi
19 days agodani_m08
19 days agoRelated Discussions
prefinished hardwood-lying next to 'real' hardwood????
Comments (6)Im confused..... You say you want "real hardwoods" on the stairs and prefinished "real hardwoods" in the bedrooms. It sounds like you're wanting the same "type" wood with the same "type" finish and the same "type" top coat on it. You know that apples-to-apples thing. So why not prefinished for the stairs too? Then it is the same. I doubt you would save any money by having an installer finish the wood for you. But, if for some reason you need one stained and one not then have your installer bring you samples of the stairs that he has match-finished. Or, if you plan to do this yourself- have an actual paint store (not HD or Lowes-- but a paint expert) "match" the prefinished "real hardwoods" for you to sample stain several pieces on. See if it looks "real" enough to you. We did that when having our alder cabinets stained to match the knot colors in our unstained oak floors. BTW....Engineered is real wood with several layers under it that criss-cross (usually 5-7). In some areas of the country people are advised not to put down solid hardwood that might "pop" on cement floors. This is usually the case for those that live in the western states as almost all homes are built on slab. Laminate is basically a photograph. And just like any photograph some are bad and some are great....See Moreprefinished or on-site finished hardwood floors
Comments (9)Those are all good and valid points. To clarify any confusion, solid pre-finished hardwood floors can be refinished if you ever need them to be. Theres a bit more sanding involved to get the factory finish off, but it's done all the time. The floors get sanded down, and the bevels are no longer there, leaving you with a newly site-finished floor. The little grooved edges are called micro-bevels, and the durability of your flooring greatly depends on its installation. Those microlevels won't necessarily cause your flooring to be more susceptible to water damage than a site finished floor, as long as the installation is nice and tight. Yes, your hardwood floors will expand and contract, but every wood does this. It's just a natural characteristic. Quartersawn hardwood is known to have less movement than plain sawn, so if the gaps are a concern, you may want to think about looking into quarter sawn hardwood. Having hardwood in a kitchen is risky regardless if it's prefinished or site-finished. You just need to know, as a homeowner, that certain precautions need to be put into place to ensure the longevity of your floors. (Especially in a kitchen) Another thing I wanted to touch on was the fact that you said you had carpet in an area and tile in another. This would mean (hopefully) that the tile is sitting on either cement board on top of plywood, or there is a cement subfloor where the tile is located. This would have to be addressed when the tile is removed, and you are probably going to need some subfloor prep for your hardwood floors. Most likely additional plywood to bring the elevations of the floors to the same height. Many factory finishes are, in fact, more durable wear layers than a site-finished polyurethane coatings. And that is one of the reasons why many pet owners choose pre-finished floors. As long as you're not choosing a particularly soft wood, a prefinished floor would be just fine for your home. It would make sense, having children and a pet because of the time you'd have to vacate for the finishing process of site-finished floors. It would, overall, be an easier install. The quality and longevity of your hardwood floors depend on the quality of your subfloor, and the quality of the installation, not whether you have site-finished or pre-finished material. Good Luck! Pre-finished vs Site-Finished Hardwood floors...See MoreHardwood flooring prefinished vs. unfinished cost/time
Comments (11)Personal experience. Hard maple flooring. Took three days to install(working part time) with three helpers. Professional installers would have taken two or less days. However, I installed three bedrooms along a hall, the hall into and including the living room without transitions at the bedroom doorways---the entire floor is monolithic. Two days to sand(USand sander--a rotating orbit sander. They are slower than a drum sander but much more forgiving). Used MinWax polyurethane for floors($45 a gallon). Oil based, nasty smelling, but is designed to apply three coats in 36 hours. Does add an amber tint, but that was the color the wife wanted. Cure to walk(socks) in 72 hours, furniture in two weeks, area rugs in 30-45 days. You do NOT want to stay in the building(not a problem for our remodel) for the for two days. The odor is pretty much gone(with ventilation) in that second day. Cost was a big factor, we have dogs and I needed to do the work myself(had the requisite training/tools/tool rental) and we did not have to occupy until finished with most of the remodeling(bought a foreclosure and had up to three months to do the necessary work). Reason for the choice of wood was the color, the price(less than $1.23 a sq. ft.) and the finish was as water proof as could be found at the time. Factory finished means small gaps for moisture(new puppys/old dogs) to penetrate. The finish made a water tight seal except on the perimeters. And, I knew the light color would not show the scratches as would a darker color. No idea what a pro crew would have charged(my son/grandsons worked for meals and a pat on the back), but they would have only been about two days faster....See MoreGaps in newly installed engineered hardwood floor
Comments (40)Hello to everybody still following along with this! We finally did get the inspection report back - it was a very through, detailed report. To make a long story short, the inspector found issues with everything: installation of the floors/railings/balusters, staining, the flooring product itself, etc. He addressed every concern that we had, and even found additional issues. I shared the inspection report with the flooring company who installed the floors and stairs, and they have agreed to remove and replace everything. Once we gave them the inspection report, the flooring company has been really great about wanting to make everything right, and making sure that we get a really nice floor/staircase/railing system. They assured us that not a single person who worked on our project initially will be working on it this time. In fact, all of the people who originally worked on our project were either let go, or left the company on their own. Since there were also so many issues with the flooring product and the gray color, we actually decided to go with a completely different brand, color, and species of wood. Our next step is to decide on a schedule for the work - so I'm sure it'll be a while until everything is completed. Thank you to everybody who commented on this thread with your ideas, suggestions, and comments!!!...See MoreMark Romeo
19 days agoTimothy Winzell
17 days agoMark Romeo
16 days agoMark Romeo
16 days agoTish
13 days agoTimothy Winzell
12 days ago
Related Stories
HOUSEKEEPINGHow to Clean Hardwood Floors
Gleaming wood floors are a thing of beauty. Find out how to keep them that way
Full StoryFLOORSHow to Paint Your Hardwood Floors
Know how to apply nail polish? Then you can give your wooden floors a brand-new look
Full StoryMATERIALSWhat to Ask Before Choosing a Hardwood Floor
We give you the details on cost, installation, wood varieties and more to help you pick the right hardwood flooring
Full StoryREMODELING GUIDESTransition Time: How to Connect Tile and Hardwood Floors
Plan ahead to prevent unsightly or unsafe transitions between floor surfaces. Here's what you need to know
Full StoryREMODELING GUIDESContractor Tips: Smooth Moves for Hardwood Floors
Dreaming of gorgeous, natural wood floors? Consider these professional pointers before you lay the first plank
Full StoryGREAT HOME PROJECTSWhat to Know Before Refinishing Your Floors
Learn costs and other important details about renewing a hardwood floor — and the one mistake you should avoid
Full StoryMATERIALSWhat to Know About Luxury Vinyl Flooring
The flooring material has become increasingly popular. Here’s how to determine its quality and get it installed
Full StoryREMODELING GUIDES5 Innovative Wood Floors
Natural Forms? Wine Barrels? Peach Pits? Take a Look at Some New Ideas for a Warm Wood Floor
Full StoryMOST POPULARPros and Cons of 5 Popular Kitchen Flooring Materials
Which kitchen flooring is right for you? An expert gives us the rundown
Full StoryREMODELING GUIDESWhat to Know About Engineered Wood Floors
Engineered wood flooring offers classic looks and durability. It can work with a range of subfloors, including concrete
Full Story
Uptown Floors